Water Level Site Status Codes (lev_status_cd)

A code indicating the status of the site at the time the water level was measured. If the water level measured represents a static level, this field is blank.

Code	Description
A	Water level was affected by atmospheric pressure.
B	Water level was affected by tide stage.
C	Water level was affected by ice.
D	The site was dry (no water level is recorded).
E	The site was flowing recently.
F	The site was flowing. Water level or head could not be measured without additional equipment.
G	A nearby site that taps the same aquifer was flowing.
H	A nearby site that taps the same aquifer had been flowing recently.
I	Recharge water was being injected into the aquifer at the site.
J	A nearby site that taps the same aquifer was injecting recharge water.
K	Water was cascading down the inside of the well.
L	Brackish Saline Water level was affected by brackish or saline water.
M	Well was plugged and not in hydraulic contact with formation.
N	The measurement was discontinued.
O	An obstruction was encountered in the well (no water level was recorded).
P	The site was being pumped.
R	The site had been pumped recently.
S	A nearby site that taps the same aquifer was being pumped.
T	A nearby site that taps the same aquifer had been pumped recently.
V	A foreign substance was present on the surface of the water.
W	The well was destroyed (no water level was recorded).
X	The water level was affected by stage in nearby surface-water site.
Z	Other conditions existed that would affect the measured water level.