| Lev Status Cd |
Lev Status Ds |
| 1 |
Static |
| 2 |
Below |
| 3 |
Above |
| 4 |
GWTideAffected |
| 5 |
GWSWAffected |
| 6 |
NoMeasurement |
| 7 |
Saline |
| 8 |
ForeignSubstance |
| A |
Water level was affected by atmospheric pressure |
| B |
Water level was affected by tide stage |
| C |
Water level was frozen (no water level was recorded) |
| D |
Site was dry (no water level was recorded) |
| E |
Site was flowing recently |
| F |
Site was flowing. Water level or head could not be measured without additional equipment |
| G |
Nearby site that taps the same aquifer was flowing |
| H |
Nearby site that taps the same aquifer had been flowing recently |
| I |
Recharge water was being injected into the aquifer at this site (Injector site) |
| J |
Recharge water was being injected into nearby site that taps the same aquifer (Injector site monitor) |
| K |
Water was cascading down the inside of the well (cascading water) |
| L |
Water level was affected by brackish or saline water (brackish saline) |
| M |
Well was not in hydraulic contact with formation |
| N |
Measurement was discontinued (no water level was recorded) |
| O |
Complete obstruction was encountered in the well (no water level was recorded) |
| P |
Water level was affected by pumping at the time of the measurement |
| R |
Water level was affected by recent pumping |
| S |
Water level was affected at the time of the measurement by pumping at a nearby site that taps the same aquifer |
| T |
Water level was affected recently by pumping at a nearby site that taps the same aquifer |
| V |
Foreign substance was present on the surface of the water |
| W |
Well was destroyed |
| X |
Water level was affected by stage in nearby surface-water site |
| Z |
Other conditions existed that may have affected the measured water level |
